|
AirTite Coin Holders
There is a difference. We
carry the original AirTite holders, invented by Norman W. Therrien, which has
been manufactured for over 20 years. There is a competing product,
recently introduced to the marketplace, with a similar name. This product
uses plastic rings, not the time-proven inert polyethylene inner ring. As
the old saying goes, "if the price is too good to be true, it probably
is." We don't set minimum quantities to qualify for a discount,
we discount regardless of Qty.
One other thing you need to look out for. Our product is factory-sealed in
blister packaging, not re-packed from bulk product, thrown loose in a bag, that
you'll find sold by many coin supply dealers at a discount. The advantage of
original Airtite blister packaging is that you won't receive scratched, finger-smudged holders or rings, or
product that has collected dust and moisture, which ultimately ends up on
your coin surfaces.
 |
The choice holder of
numismatic archivists. All holders are manufactured using acrylic
plastic with a non-yellowing agent, producing a two-piece snap together
friction fit cover and base. Rings are produced by cross linked
polyethylene (trade name "Volara"), which is totally inert.
None of the components contain any PVC. The holders are highly durable
and scratch resistant. |
Attention Quantity Buyers
In bulk quantities, any size AirTite ringed holder is available at a deep
discount. Ideal for use in preparing special special mailing incentives,
corporate give-a ways, charitable fundraisers, shareholder perks and many other
mass-distribution uses.
Bulk Pricing*
| Qty |
Bulk
Each Price |
| 250 |
$.58 each |
| 500 |
$.55 each |
| 1000 |
$.50 each |
*Bulk holders are
not returnable, so be certain you've ordered the correct size and ring color.
Bulk pricing is for lots of 250 of one holder size and one ring color. Bulk
holders are packed in cartons layered with tops and bottoms and not in blister
packaging. Bulk rings are packed loose in an individual carton. Bulk
holders are considered special order and not returnable.
AirTite Holders With
Rings

We have a recommendation for you wish to use Airtite holders, but don't want to
store your holdered coins in a box, or mount them on a display card. Eagle
makes 2x2" album pages that are made of semi-rigid and archivally-safe clear
plastic. The page consists of 20 vacuum-formed pockets that sit below the
surface of the page. Each pocket has a clear strap going across the bottom
to keep the holders from moving. These pages are designed to be placed
into a 3-ring binder.
While the AirTite holders are
round, they fit nicely into the 2x2 pockets of a Eagle page. The plastic
strap at the bottom of each 2x2 pocket keeps the Airtite holder in place within
the pocket.
By using this alternative, you
can custom-assemble a collection holdered in AirTite holders in a ring binder.
We have included a link below to the Eagle section of our website that offers
the 2x2 20-pocket pages.
Eagle
2x2 pocket pages and Binders
Sold elsewhere from $.89 to $1.05 each
Our Price from $.67 to $.79 each!
We base our discounts on the real manufacturer's suggested retail price
for blister-packed product and not repacks that may contaminate your valuable
coins!
| Any A-style Holder
(10-19mm) |
Reg. $.89 |
Our Price $.67 |
| Any T-style Holder
(20-25mm) |
Reg. $.95 |
Our Price $.71 |
| Any H-style Holder
(26-32mm)
|
Reg. $.99 |
Our Price $.74 |
| Any I- style Holder
(33-42mm) |
Reg. $1.05 |
Our Price $.79 |
| Stock
# |
Coin
Series
|
List
Price |
Our Price |
|
| AT-T22 |
Half Cent - Liberty Cap 1793
22mm |
.95 |
.71 |
|
| AT-T23 |
Half Cent - All other types
23mm |
.95 |
.71 |
|
| AT-H26 |
Large Cent - Chain type 26mm
Size varies. Actual diameter measurement necessary. |
.99 |
.74 |
|
| AT-H27 |
Large Cent - Chain type 27mm
Size varies. Actual diameter measurement necessary. |
.99 |
.74 |
|
| AT-H26 |
Large Cent - Wreath type 26mm
Size varies. Actual diameter measurement necessary. |
.99 |
.74 |
|
| AT-H27 |
Large Cent - Wreath type 27mm
Size varies. Actual diameter measurement necessary. |
.99 |
.74 |
|
| AT-H28 |
Large Cent - Wreath type 28mm
Size varies. Actual diameter measurement necessary. |
.99 |
.74 |
|
| AT-H29 |
Large Cent - Liberty Cap type
1793-96 29mm |
.99 |
.74 |
|
| AT-H29 |
Large Cent - Bust type 1796
-1807 29mm |
.99 |
.74 |
|
| AT-H29 |
Large Cent - Classic type 1808
-1814 29mm |
.99 |
.74 |
|
| AT-H29 |
Large Cent - Cornet type 1816
-1836 29mm |
.99 |
.74 |
|
| AT-H27 |
Large Cent - Cornet type 1837
-1857 27mm |
.99 |
.74 |
|
| AT-A19 |
Flying Eagle Cent 19mm |
.89 |
.67 |
|
| AT-A19 |
Indian Cent 19mm |
.89 |
.67 |
|
| AT-A19 |
Lincoln Cent 19mm |
.89 |
.67 |
|
| AT-T23 |
Two Cent Piece 23mm |
.95 |
.71 |
|
| AT-A14 |
Three Cent Silver 14mm |
.89 |
.67 |
|
| AT-A18 |
Three Cent Nickel 18mm |
.89 |
.67 |
|
| AT-A16 |
Half Dime - 1794 - 1805 16mm |
.89 |
.67 |
|
| AT-A15 |
Half Dime - All other types 15mm |
.89 |
.67 |
|
| AT-T20 |
Shield Nickel 20mm |
.95 |
.71 |
|
| AT-T21 |
Liberty Nickel 21mm |
.95 |
.71 |
|
| AT-T21 |
Buffalo Nickel 21mm |
.95 |
.71 |
|
| AT-T21 |
Jefferson Nickel 21mm |
.95 |
.71 |
|
| AT-A19 |
Bust Dime - 1796 - 1837 19mm |
.89 |
.67 |
|
| AT-A19 |
Bust Dime - All other types 19mm |
.89 |
.67 |
|
| AT-A18 |
Seated Dime 18mm |
.89 |
.67 |
|
| AT-A18 |
Barber Dime 18mm |
.89 |
.67 |
|
| AT-A18 |
Mercury Dime 18mm |
.89 |
.67 |
|
| AT-A18 |
Roosevelt Dime 18mm |
.89 |
.67 |
|
| AT-T22 |
Twenty Cent Piece 22mm |
.95 |
.71 |
|
| AT-H27 |
Quarters - 1796 - 1828 27mm |
.99 |
.74 |
|
| AT-T24 |
Seated Quarters 24mm |
.95 |
.71 |
|
| AT-T24 |
Barber Quarters 24mm |
.95 |
.71 |
|
| AT-T24 |
Standing Quarters 24mm |
.95 |
.71 |
|
| AT-T24 |
Washington Quarters, State
Quarters 24mm |
.95 |
.71 |
|
| AT-H32 |
Bust Halves - 1794 - 1836 32mm |
.99 |
.74 |
|
| AT-H30 |
Seated Halves 30mm |
.99 |
.74 |
|
| AT-H30 |
Barber Halves 30mm |
.99 |
.74 |
|
| AT-H30 |
Walking Halves 30mm |
.99 |
.74 |
|
| AT-H30 |
Franklin Halves 30mm |
.99 |
.74 |
|
| AT-H30 |
Kennedy Halves 30mm |
.99 |
.74 |
|
| AT-I39 |
Bust Dollars - 1794 - 1839
39mm Size varies. Actual diameter measurement necessary. |
1.05 |
.79 |
|
| AT-I40 |
Bust Dollars - 1794 - 1839
40mm Size varies. Actual diameter measurement necessary. |
1.05 |
.79 |
|
| AT-I38 |
Seated Dollars 38mm |
1.05 |
.79 |
|
| AT-I38 |
Trade Dollars 38mm |
1.05 |
.79 |
|
| AT-I38 |
Morgan Dollars 38mm |
1.05 |
.79 |
|
| AT-I38 |
Peace Dollars 38mm |
1.05 |
.79 |
|
| AT-I38 |
Ike Dollars 38mm |
1.05 |
.79 |
|
| AT-H26 |
Susan B. Anthony Dollars 26mm |
.99 |
.74 |
|
| AT-I40 |
Silver Eagle Dollars 40mm |
1.05 |
.79 |
|
| AT-H26 |
Sacagawea Dollars 26mm |
.99 |
.74 |
|
| AT-H26 |
2007-2016 Presidential Dollars 26mm |
.99 |
.74 |
|
| AT-I39 |
1 oz. Silver Medallion 39mm |
.1.05 |
.79 |
|
| AT-A16 |
1/10 oz. Gold Eagle 16mm |
.89 |
.67 |
|
| AT-T22 |
1/4 oz. Gold Eagle 22mm |
.95 |
.71 |
|
| AT-H27 |
1/2 oz. Gold Eagle 27mm |
.99 |
.74 |
|
| AT-H32 |
1 oz. Gold Eagle 32mm |
.99 |
.74 |
|
| AT-A13 |
Gold $ (Type 1) 13mm |
.89 |
.67 |
|
| AT-A15 |
Gold $ (Types 2 and 3) 15mm |
.89 |
.67 |
|
| AT-T20 |
Gold $2.50 (1795-1808) 20mm |
.95 |
.71 |
|
| AT-A18 |
Gold $2.50 (All others) 18mm |
.89 |
.67 |
|
| AT-T20 |
Gold $3.00 20mm |
.95 |
.71 |
|
| AT-T22 |
Gold $4.00 22mm |
.95 |
.71 |
|
| AT-T25 |
Gold $5.00 (1795-1829) 25mm |
.95 |
.71 |
|
| AT-T24 |
Gold $5.00 (1829-1834) 23.8mm |
.95 |
.71 |
|
| AT-T23 |
Gold $5.00 (1834-1838) 22.5mm |
.95 |
.71 |
|
| AT-T23 |
Gold $5.00 (1839-1840) 22.5mm |
.95 |
.71 |
|
| AT-T22 |
Gold $5.00 (1840-1929) 21.6mm |
.95 |
.71 |
|
| AT-I33 |
Gold $10.00 (1795-1804) 33mm |
1.05 |
.79 |
|
| AT-H27 |
Gold $10.00 (1838-1933) 27mm |
.99 |
.74 |
|
| AT-I34 |
Gold $20.00 34mm |
1.05 |
.79 |
|
|
SOUTH
AFRICA |
| AT-A16 |
Krugerrand 1/10 oz. 16mm |
.89 |
.67 |
|
| AT-T22 |
Krugerrand 1/4 oz. 22mm |
.95 |
.71 |
|
| AT-H27 |
Krugerrand 1/2 oz. 27mm |
.99 |
.74 |
|
| AT-I33 |
Krugerrand 1 oz. 33mm |
1.05 |
.79 |
| |